eg. used honda, used minivan, truck

Lubricating Liquid Air Spray Gun For Die Cast Machine Mould Release Paint 500mm

Price:     $53
Time Left: 25 d, 15 h, 45 min    (Sep 9, 2018 23:28:17 UTC)
Condition: New
Location: , Zhejiang

Seller's Notes:

Two-position Self-suction Single-pipe Spray Gun For Die-Casting Machine Release Agent Lubricating Fluid Sprayer spray gun total length : 500mm, There is also length 700mm for choice, please visit another listing spray gun realizes automatic remote conveying and spraying of liquid coating with the principle that the negative pressure is produced by the sudden expansion of the compressed air in the spray nozzle; it is classified into two types: two-position self-suction adjustable single-pipe spray gun, and two-position self-suction adjustable composite-pipe spray gun. The atomization quantity and area of the spray gun are adjustable, the gas discharge and atomization quantity of composite-pipe spray gun are adjustable. The gas discharge position is used for uniform drying of the coating by blowing and for the removal of the mold residues, while the liquid discharge position is used for the spray of the liquid coating. Instruction for use1. Gas inlet connector (AIR mark) is connected with the gas source connecting pipe, and liquid inlet connector (LIO mark) is connected with the liquid conveying pipe, and these connectors are bundled by iron wires or hose clamps;2. The other end of liquid conveying pipe is inserted into the open coating bucket, and the pipe opening shall be higher than the bucket bottom, avoiding being blocked by the residues;3. Operation procedures: open the first position (gas source valve spool) for the discharge of the compressed air, and open the first and...



Visit original listing page

Location: , Zhejiang